Author of this article: Peter Jones.

View Authors profile

Peter Jones has been with FAFY - Free Article For You since Tuesday, 09 March 2010.

View additional articles from this Author!

• Save Money Replacing Your 1.8L Jetta Engine (29 July 2010)
• A New View On the Saturn Vue: Rev Your Engines! (28 July 2010)
• Why Replacing Dodge Engines is a Good Way to Save Money (27 July 2010)
• Buying a Used F-150 Engine Can Save Thousands of Dollars (26 July 2010)
• Ford Taurus Engines 2000-2007 (19 July 2010)
• About That BMW Engine You Need (17 July 2010)
• Replacing Your Camry or Tacoma Engine The Right Way (13 July 2010)
• History of Volvo 80 Series Engines (05 July 2010)
• Why the Acura Engine is Superior (04 July 2010)
• Your Cadillac Deville Has More Life In It! (03 July 2010)
• An Introduction to Volvo S40 and V40 Engines (28 June 2010)
• Revving Up For Quality: A Ford Engine Raises The Bar (26 June 2010)
• The 2.8L Audi A4 Engine (24 June 2010)
• How To Find a Good 3.4L Toyota Tacoma Engine (22 June 2010)
• The MDX Gets Better: The New 3.7L Acura Engine (21 June 2010)
• What To Do If Your Northstar Engine Fails (20 June 2010)
• A Cost Analysis: Replacing a 2004 or 2005 BMW 745i Engine Assembly (18 June 2010)
• Dodge Engines: A Story of Quality (18 June 2010)
• A Summary of the Volvo XC90 and its Engine (16 June 2010)
• Ford Engines That Will Define the First Half of This Decade (16 June 2010)
• The 1.8L Audi A4 Engine (15 June 2010)
• Consider Replacing that 2.4L Toyota Camry Engine! (14 June 2010)
• How the Acura Engine in Your CL Will Save You Money: The Benefits of Quality (12 June 2010)
• Repower Your Seville and Save Money (11 June 2010)
• Why Granny's Engine Blew Up: Headgasket Problems with the Northstar Engine (04 June 2010)
• The 4.0L Jeep Wrangler Engine (04 June 2010)
• Finding Your Acura Engine (01 June 2010)
• The Hot Mercedes Engine for 2010 (31 May 2010)
• History of the Jeep Cherokee and Grand Cherokee (30 May 2010)
• Victoria vs Taurus: May the Best Mileage Win (29 May 2010)
• Dealing with Stripped Head Bolts on a Northstar Engine (27 May 2010)
• The 2.5L Jeep Wrangler Engine (26 May 2010)
• Replacing an Acura CL Engine (25 May 2010)
• Late 90's Mercedes Head Gasket Replacement (21 May 2010)
• Easy Upgrades: Fun With Your Grand Cherokee Or Cherokee Engine (20 May 2010)
• Ford's Crown Victoria and Taurus: Like Big Brother, Little Brother (20 May 2010)
• The 2.4L Jeep Wrangler Engine (18 May 2010)
• Acura Engine Conversions (16 May 2010)
• Is Replacing My Mercedes Engine Worth it? Yes! (14 May 2010)
• Choose my Ride: Help Deciding Between the Jeep Cherokee and the Grand Cherokee (06 May 2010)
• Comparing the SHO Ford Taurus Engine and the Ford Crown Victoria Engines (04 May 2010)
• How to Buy a Mercury Monterey or Mountaineer Engine (29 April 2010)
• The History Nissan Maxima and 350Z Engine (26 April 2010)
• Replacing a Honda Civic or Honda Accord Engine (25 April 2010)
• Why Your Chrysler Engine is Worth Replacing (22 April 2010)
• Two 2.5s: A History of the 2.5L Engines in the Subaru Outback and Nissan Sentra (22 April 2010)
• What to Look for When Buying a VW Engine or a Toyota Tacoma Engine (20 April 2010)
• Properly Installing Toyota Tundra or Celica Engines (19 April 2010)
• Differences Between the Mercury Monterey and Mercury Mountaineer Engine (16 April 2010)
• Diagnosing a Bad Head Gasket in a Nissan Maxima and Nissan 350Z Engine (15 April 2010)
• How to Maintain Your Honda Civic or Honda Accord Engine (13 April 2010)
• How To Replace Your Chrysler Engine (11 April 2010)
• The EJ25 Subaru Outback Engine vs. The QR25DE Nissan Sentra Engine (09 April 2010)
• The 2.5L VW Engine and the 5VZFE Toyota Tacoma Engine (07 April 2010)
• Toyota Engine Technical Specifications (07 April 2010)
• A Look at the Mercury Monterey and Mountaineer Engine (05 April 2010)
• Comparing the 3.5L Nissan Maxima and 3.5L 350Z Engine (02 April 2010)
• Buying A Used Chrysler Engine (31 March 2010)
• Engine Replacement: How to Find a Subaru Outback or Nissan Sentra Engine (31 March 2010)
• Info On Your Late Model Toyota Tacoma Engine or VW Engine (29 March 2010)
• 100% Customer Satisfaction at Low Mileage Engines, LLC (27 March 2010)
• Sorting out replacing Your Six Cylinder Toyota Tundra engine and Four Cylinder Celica Engines (26 March 2010)
• Choose the Best Used Car Seller: Low Mileage Engines, LLC (26 March 2010)
• Low Mileage Engine, LLC and the BBB (25 March 2010)
• Low Mileage Engines, LLC is Dedicated to Customer Service (24 March 2010)
• Low Mileage Engines, LLC: The Best Choice (19 March 2010)
• Low Mileage Engines, LLC: Used Engine Home (17 March 2010)
• Low Mileage Engines, LLC: Quality Products and Services (11 March 2010)
• Go Green with Used Engines (10 March 2010)
• Use Used Engines and Cut Your Cost of Auto Repair (10 March 2010)
• A+ BBB Rating for Low Mileage Engines, LLC (09 March 2010)

You have permission to re-publish this article electronically or in print, as long as you are able to follow the Publishers Guidelines.

Use the tools below to copy the article in plain text form, or you can copy it as HTML, ready to copy and paste directly into a web page.

HTML Version

• <html> <head> <title>Common Problems with the Northstar Engine</title> </head> <body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0"> <h1>Common Problems with the Northstar Engine</h1> <strong>Author: Peter Jones</strong><br /> <p></p> <p>For example, if you own a Cadillac STS engine Deville 97 with a 32 valve 4.6L Northstar Engine with a blown engine, chances are good that by simply doing a pressure test and a spark plug test, you will discover that the head gasket has blown. After identifying what bank it is on, you have to work on getting it replaced. Simply fixing the gasket itself is not a realistic option because of the cracks. Unfortunately, repair, which is a replacement job, is neither cheap nor easy. It is nearly impossible to do it on your own with a simple set of hand tools, nor can you get your local mechanic to do it unless he or she has plenty of experience with this particular problem. <br /><br />In retrospect, the problem of stripped head bolts emerged after 1996 and gradually disappeared after 1999. Although most automotive experts contend that by 2000 the problem was behind GM, some critics argue that it took GM another 10 years to fully resolve the problem.<br /><br />What happened in 1997, 1998, and 1999 models is due to poor decision making on the part of GM. The run of GM problems with Northstar Engines began when they moved away from a green silica based coolant and moved to another coolant called Dex cool. This coolant simply could not do the job. The Northstar Engine problems are similar to the problems associated with the Quad 4. In both cases, the head bolts had a fine thread that easily stripped once the engine reached a certain level of inability to effectively dissipate heat. What stripped the head bolts was the chemical reaction between the steel bolts and the aluminum block. Basically, aluminum was too soft. Thus, it is not really due to defective bolts or to defective blocks, but the reaction of one to the other, specifically the reaction between steel bolts with aluminum blocks. Unless the coolant was perfectly maintained, the threads dissolved when the heat became too intense, resulting in the engine blowing up. Once GM reduced the block hardening process that they had previously used, the block and the bolts began to go to wrack and ruin, a chemical reaction similar to applying a flame to a block of cheese. Usually, this problem became typical when the Northstar Engine was closing in on the 100,000 mark. At this point, the Northstar Engine could not stay cool enough to prevent the threads from dissolving.<br /><br />Resolving the problem was not simple. The entire engine had to be pulled, then drilled, then retapped, and then finally have timeserts installed. This not only took about 40 hours or more, but it cost car owners from $3,000 to $5,000. Moreover, unless the work was expertly done, results were often less than satisfactory. Considering that the models from 1997 to 1999 have a value of $6,000, the repairs came close to the cost of the entire car itself. <br /><br />A better solution to fixing the Northstar Engine or buying a new engine is to get a used engine where the bolts have been beefed up. Once the bolts have been replaced with head studs, the Northstar Engine begins to work like a charm.</p> <p> </p> <p><br /> <p><br /><br /><br /><br /><br /><br /><br />So instead of hunting down an expert on <a href="http://www.lowmileageengines.com/used-engines/cadillac/">Northstar Engine</a> and instead of buying a new engine with the same defective bolt-gasket chemistry, it is much cheaper and less time consuming to get a used engine with reinforced bolts.</p> <br /> <p>Article Source: <a href="/../">Article Directory - http://www.freearticleforyou.com</a></p> </p></p></body> </html>

• TEXT Version

  • Common Problems with the Northstar Engine Author: Peter Jones For example, if you own a Cadillac STS engine Deville 97 with a 32 valve 4.6L Northstar Engine with a blown engine, chances are good that by simply doing a pressure test and a spark plug test, you will discover that the head gasket has blown. After identifying what bank it is on, you have to work on getting it replaced. Simply fixing the gasket itself is not a realistic option because of the cracks. Unfortunately, repair, which is a replacement job, is neither cheap nor easy. It is nearly impossible to do it on your own with a simple set of hand tools, nor can you get your local mechanic to do it unless he or she has plenty of experience with this particular problem. In retrospect, the problem of stripped head bolts emerged after 1996 and gradually disappeared after 1999. Although most automotive experts contend that by 2000 the problem was behind GM, some critics argue that it took GM another 10 years to fully resolve the problem.What happened in 1997, 1998, and 1999 models is due to poor decision making on the part of GM. The run of GM problems with Northstar Engines began when they moved away from a green silica based coolant and moved to another coolant called Dex cool. This coolant simply could not do the job. The Northstar Engine problems are similar to the problems associated with the Quad 4. In both cases, the head bolts had a fine thread that easily stripped once the engine reached a certain level of inability to effectively dissipate heat. What stripped the head bolts was the chemical reaction between the steel bolts and the aluminum block. Basically, aluminum was too soft. Thus, it is not really due to defective bolts or to defective blocks, but the reaction of one to the other, specifically the reaction between steel bolts with aluminum blocks. Unless the coolant was perfectly maintained, the threads dissolved when the heat became too intense, resulting in the engine blowing up. Once GM reduced the block hardening process that they had previously used, the block and the bolts began to go to wrack and ruin, a chemical reaction similar to applying a flame to a block of cheese. Usually, this problem became typical when the Northstar Engine was closing in on the 100,000 mark. At this point, the Northstar Engine could not stay cool enough to prevent the threads from dissolving.Resolving the problem was not simple. The entire engine had to be pulled, then drilled, then retapped, and then finally have timeserts installed. This not only took about 40 hours or more, but it cost car owners from $3,000 to $5,000. Moreover, unless the work was expertly done, results were often less than satisfactory. Considering that the models from 1997 to 1999 have a value of $6,000, the repairs came close to the cost of the entire car itself. A better solution to fixing the Northstar Engine or buying a new engine is to get a used engine where the bolts have been beefed up. Once the bolts have been replaced with head studs, the Northstar Engine begins to work like a charm.   So instead of hunting down an expert on Northstar Engine and instead of buying a new engine with the same defective bolt-gasket chemistry, it is much cheaper and less time consuming to get a used engine with reinforced bolts. Article Source: Article Directory - http://www.freearticleforyou.com